top of page

Crosby®

Screw Pin Shackle

• Capacities 1/3 thru 55 metric tons, grade 6.

• Forged - Quenched and Tempered, with alloy pins.

• Working Load Limit and grade “6” permanently

    shown on every shackle.

• Hot Dip galvanized or self colored.

• Fatigue rated.

• Shackles 25t and larger are RFID EQUIPPED.

• Shackles can be furnished proof tested with certificates

    to designated standards, such as ABS, DNV, Lloyds, or

    other certification. Proof testing and certification available

    when requested at the time of order, charges will apply.

• Approved for use at -40 degrees C (-40 degrees F) to

    204 degrees C (400 degrees F).

• 3.25t through 25t G209 anchor shackles are type

    approved to DNV Certification Notes

    2.7-1- Offshore Containers.

    These shackles are statistical proof and impact tested to

    42 joules (31 ft-lbs.) min. avg. at -20 degrees C

    (-4 degrees F). The tests are conducted by Crosby and

    3.1 test certification is available upon request.

• Meets or exceeds all requirements of ASME B30.26.

• Type Approval certification in accordance with ABS 2007

     Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification

     on Cranes available. Certificates available when requested

     at time of order and may include additional charges.

• Crosby 3.25t through 25t G209 anchor shackles are

     type approved to DNV Certification Notes 2.7-1ㅡ 

     Offshore Containers. These Crosby shackles are statistical

      proof and impact tested. The tests areconducted by Crosby 

      and 3.1 test certification is available upon request.

• Look for the Red Pin ® . . . the mark of genuine Crosby quality.

  • 스크류 핀 앵커 샤클

G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 2, except for those provisions required

of thecontractor.

For additional information,

see page 452.

G -209 / S-209
G -209 / S-209

G-210 스크류 핀 체인 샤클은 미국 연방 규격(Federal

Specification) RR-C-271D TYPE lV A, Grade A, Class 2의

성능 요구 사항(계약자 필수 조항은 제외)을 충족합니다. 자세한 내용은

426페이지를 참조하십시오.

  • 스크류 핀 체인 샤클
G -210 / S-210

* 참고 :  최대 보증 하중은 사용 한계 하중의 2배입니다. 

최소 극한 강도는 사용 한계 하중의 6배입니다. 측면 하중 적용으로 인한 사용 한계 하중 축소에 대한 자세한 내용은 80페이지를 참조하십시오.

bottom of page