Suhbo Ind Co.,Ltd

Addr. : 6, Mipyeong-ro, 106 beon-gil, Wonsam-Myeon, Cheoin-gu, Yongin-si, Kyunggi-do, Korea    

Tel : +82 (0)31-334-6979/1788     Fax : +82 (0)31-334-1789      e-mail : suhbo@suhbo.co.kr                                                     

Copyright©2011 SUHBO INDUSTRY CO.,LTD. ALL RIGHTS RESERVES.

Crosby®

ALLOY SCREW PIN TYPE

• Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles.

• Forged Alloy Steel - Quenched and Tempered, with alloy pins.

• Working Load Limit permanently shown on every shackle.

• Hot Dip Galvanized.

• Shackles can be furnished proof tested with certificates to designated standards,

    such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and

    certification available when requested at the time of order.

• Approved for use at -40 degree C (-40 degree F) to 204 degree C 

    (400 degree F).

• Meets or exceeds all requirements of ASME B30.26 including identification,

    ductility,design factor, proof load and temperature requirements. Importantly,

    these shackles meet other critical performance requirements including impact

    properties and material traceability, not addressed by ASME B30.26.

Screw pin anchor shackles meet the performance requirements 

of Federal Specification RR-C-271F Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

For additional information, see page 452.

G - 209A
  • G-209A CROSBY® ALLOY SCREW PIN ANCHOR SHACKLE

* Maximum Proof Load is 2 times the Working Load Limit. Minimum Ultimate Load is 4.5 times the Working Load Limit.

   For Working Load Limit reduction due to side loading applications, see page 94. 

G - ​2169
S - ​2169

• Capacities of 7, 12.5 and 18 metric tons.

• Quenched and Tempered for maximum strength.

• Forged Alloy Steel.

• Available in galvanized and self colored finished.

• Individually proof tested and magnetic particle inspected.

    Crosby certification available at time of order.

• Meets or exceeds all requirements of ASME B30.26 including

    identification, ductility, design factor, proof load and temperature

    requirements. Importantly, these shackles meet other critical

    performance requirements including fatigue life, impact properties

    and material traceability, not addressed by ASME B30.26. 

• Look for the Red Pin ® . . . the mark of genuine Crosby quality. 

  • G-2169/S-2169 Crosby® Alloy Screw Pin “Wide Body” Shackles

* Ultimate Load is 5 times the Working Load Limit. Proof Load is 2 times the Working Load Limit.