LIFTING SOLUTION
Crosby®
Bolt Type Shackle
• Capacities 1/3 thru 150 metric tons, grade 6.
• Working Load Limit and grade “6” permanently shown on every shackle.
• Forged - Quenched and Tempered, with alloy pins.
• Hot Dip galvanized or self colored.
(85, 120, and 150 metric ton shackles are all hot dip galvanized
bows and the bolts are Dimetcoted ® and painted red)
• Fatigue rated (1/3t - 55t).
• Shackles 25t and larger are RFID EQUIPPED.
• Approved for use at -40 degree C (-40 degree F) to
204 degree C (400 degree F).
• Meets or exceeds all requirements of ASME B30.26.
• Shackles 85 metric tons and larger are individually proof tested
to 2.0 times the working load limit.
• Type Approval certification in accordance with ABS 2007 Steel
Vessel Rules 1-11-17.7 and ABS Guide for Certification on
Cranes available. Certificates available when requested at time of
order and may include additional charges.
• 3.1 Certification as standard available for charpy and statistical
proof test for pg 79 only up to 25 tons to DNV2.7-1 and EN13889.
• Crosby 3.25t through 25t G2130OC anchor shackles are type approved
to DNV Certification Notes 2.7-1- Offshore Containers.
These Crosby shackles are statistical proof and impact tested to 42 joules
(31 ft-lbs.) min. avg. at -20 degrees C (-4 degrees F). The tests are
conducted by Crosby and 3.1 test certification is available upon request.
Refer to page 88 for Crosby COLD TUFF ® shackles that meet the
additional requirements of DNV rules for certification of lifting
applications - Loose Gear.
• All other 2130 shackles can meet charpy requirements of 42 joules
(31 ft-lbs) avg at -20 degrees C (-4 degrees F) upon special request.
• Look for the Red Pin ® . . . the mark of genuine Crosby quality.
• Capacities 1/2 thru 85 metric tons, grade 6.
• Working Load Limit and grade “6” permanently shown on every shackle.
• Forged - Quenched and Tempered, with alloy pins.
• Hot Dip galvanized or self colored. (85, 120, and 150 metric ton shackles
are all hot dip galvanized bows and the bolts are Dimetcoted ® and
painted red)
• Fatigue rated (1/2t - 55t).
• Shackles 25t and larger are RFID EQUIPPED.
• Approved for use at -40 degree C (-40 degree F) to 204 degree C
(400 degree F).
• 3.25t through 25t bow and bolt are certified to meet charpy impact
testing of 42joules (31 ft-Ibs.) min. avg. at -20 degrees C (-4 degrees F)
• Meets or exceeds all requirements of ASME B30.26.
• Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
• Shackles 55 metric tons and smaller can be furnished proof tested
with certificates to designated standards, such as ABS, DNV, Lloyds, or
other certification when requested at time of order.
• Type Approval and certification in accordance with ABS 2006 Steel
Vessel Rules 1-1-17.7,and ABS Guide for Certification of Cranes.
• All 2150 shackles can meet charpy requirements of 42 joules (31 ft-lbs)
avg at -20 degree C (-4 degrees F) upon special request.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.
G -209 / S-209
G - 2130 / S - 2130
Bolt Type Anchor shackles with thin head bolt - nut with cotter pin.
Meets the performance requirements of Federal Specification
RR-C-271F Type IVA, Grade A, Class 3, except for those provisions
required of the contractor.
For additional information, see page 452.
Bolt Type chain shackles with thin hex head bolt - nut with cotter pin.
Meets the performance requirements of Federal Specification
RR-C-271F Type IVA, Grade A, Class 3, except for
those provisions required of the contractor.
For additional information,see page 452.
G - 2150 / S - 2150
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit.
Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading
applications, see page 94. † Individually Proof Tested with certification.
‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.